USEFUL stuff...
This is where those things that have no home go to find a new friend.
Please only send images/files less that 500k. Ads will be posted for approx. two months and then removed if no extension is requested.
Contact:Webmaster
Please only send images/files less that 500k. Ads will be posted for approx. two months and then removed if no extension is requested.
Contact:Webmaster
Laguna 15/24 lathe for sale
Contact Murray at the following email if interested:
murray.cameron@gmail.com
I'm upgrading my shop, so I'm looking to sell this excellent lathe. The Laguna 15/24 REVO was bought new in July 2020 - it was one of the first Laguna 15/24 lathes in Ottawa. It didn't get much use until my basement shop was completed in summer of 2021. So it has approximately 3 years of regular use.
The Laguna 15|24 REVO lathe provides excellent power and capacity using a standard 110V outlet (15 Amp service). The wheel assembly was added in 2021 and the bed extension last year. The extension gives you an extra 20 inches between centres (for a total of 44 inches) and allows you to go up to a 24 inch bowl/platter in outboard turning mode.
The lathe can be broken down into pieces - the extension comes off as does the headstock. The legs are fully adjustable, so you can fit the lathe properly to your height. The wheels are handy to move the lathe around your shop.
Details from Laguna:
With the launch of the Revo 15|24 Laguna is filling the gap between the Revo 12|16 & the legendary Revo 18|36, providing space constrained users with more power and capacity.
The headstock can be repositioned to the tail end of the bed for outboard turning. The optional 20” extension (item #172165, sold separately) can expand your outboard turning options. A 24-position indexing plate allows the headstock to rotate in 15° increments. The headstock and tailstock accept an MT2 taper.
Precise Position adjusts the spur drive for the ideal point-to-point alignment between the drive center and the drive center. This simple adjustment of 4 screws and minor manipulation of the drive center brings your 15|24 lathe into ideal alignment for turning.
The PWM (Pulse Width Modulation) motor utilizes transistors for fast communication between the motor and controller. PWM controls stabilize the RPM and provide consistent torque (voltage) when using speeds at low RPM so you can turn with confidence at any speed on the Laguna REVO 15|24 Lathe.
Specifications:
Electrical: 1.5HP, 110 Volt, 8Amp, 60 Hz
Motor: Permanent Magnet DC, 2150 RMP
PWM: Pulse Width Module Speed Control
Recommended Breaker: 15 Amp
CSA C/US: 256540
Spring Loaded Spindle Lock
Swing Over Bed: 15-1/2″
Swing Over Banjo: 11-3/32″
Max. Outboard Swing With Optional Accessory: 25″
Tool-Rest Post Size: 1″
Tool-Rest Length: 12″
Spindle Taper: MT#2
RPM High: 650-4200
RPM Mid: 325-2100
RPM Low: 50-650
Tailstock Quill: 4-1/2″, Self-Ejecting
Floor To Spindle Center Low: 36-13/32″
Floor To Spindle Center High: 51-13/32″
Floor To Bed Min.: 28-19/32″
Floor To Bed Max.: 43-19/32″
Front Bearing: TPI Taiwan 6206LLU
Rear Bearing: TPI Taiwan 6205LLU
Spindle Index #: 24 with Lock
Distance Between Centers: 24″
Headstock/Tailstock Through-Bore: 3/8″
Headstock Travel: Full Length
Tailstock Storage Of Centers
Spindle Size: 1-1/4″ x 8TPI RH
Posted 24 Apr 24
Delta Wood Lathe for Sale
Nice Delta lathe. Will turn 16" in the gap, 12" over the bed, and 38" between centres. Runs on 240v single phase, 3/4 horsepower. Includes the duplicator, which is a rare feature, for making multiple parts like spindles for railings and legs for chairs or tables. Also includes tailstock with live centre, toolrest, and holder. 1" x 8 tpi spindle thread. Can load onto your truck or trailer, or can deliver within a reasonable distance. I am selling it for a friend who is undergoing chemotherapy, and does not have the ability to be meeting with people right now. Please contact me for additional information. Price is negotiable.
Jason Alford 613-813-2413 Posted 17 Mar 24 |
Craftex 14" bandsaw for sale
Craftex CX100 14" Bandsaw from BusyBee Tools. Includes fence, mitre guide and a couple of spare blades. Has tilting table. Can load onto your truck or trailer, or can deliver within a reasonable distance. I am selling it for a friend who is undergoing chemotherapy, and does not have the ability to be meeting people right now. Please contact for more information. Price is negotiable in person.
Jason Alford 613-813-2413 Posted 17 Mar 24 |
3D Printed Jigs and Accessories
Contact Tom via email (ThomasBurn90@gmail.com) or during a club meeting to place your order:
All parts are made to order and many colours are available (check with Tom for the current selection). Orders are usually complete within a week, or can be brought to the next club meeting for pickup.
- Center finder - $8
- Angle gauge - $3
- Grinder angle setting jig - $7
- Chuck mounting stud - $8
- DeWalt battery mount - $8
- DeWalt tool mount - $8
- Tailstock plug (elbow saver) - $6
- Tenon/Mortise gauge - $7
All parts are made to order and many colours are available (check with Tom for the current selection). Orders are usually complete within a week, or can be brought to the next club meeting for pickup.
Sanding Discs
If anyone needs Velcro-backed sanding discs I can ship them out by mail. Payment by e-mail transfer or by arrangement. (I just shipped 20 packages of 2" discs to Quebec by Canada Post at a cost of $5.00.)
2" discs are $1.00 per package of 4
3" discs are $2.00 per package of 5
Both sizes available in the following grits: 80, 120, 180, 220, 320, 400, 600, 800, 1000/1200, 1500 & 2000/2500
Contact me via at ken.waller@kenwallerwoodcrafts.ca or 613-279-3035
2" discs are $1.00 per package of 4
3" discs are $2.00 per package of 5
Both sizes available in the following grits: 80, 120, 180, 220, 320, 400, 600, 800, 1000/1200, 1500 & 2000/2500
Contact me via at ken.waller@kenwallerwoodcrafts.ca or 613-279-3035